How

How to make Laminated Photo Frames

Screws M6mm x 40mm long, stainless steel, rounded screw caps
Laminating pouches, thick 125mic, sizes A7, A6 or A5
(A4 needs at least 2 screws)
Laminator HR12 Leitz

Cut or print your photo to 2/3 the size of the laminating pouches, this will leave 1/3 of the pouch as transparent frame.
Place your photo right in the middle of the pouch.
Laminate.
Perforate a hole near one of the lower corners (distance from border depends from screw shape), you can use a paper perforator.
Stick the screw from behind through the hole, screw the rounded screw cap, tighten from back.
That's all.

Screw Model
Brick Model (3 Lego bricks)

(C)opyright 2000-2006 Claude Rieth

How to make Laminated Photo Frames
Screws M6mm x 40mm long, stainless steel, rounded screw caps	Laminating pouches, thick 125mic, sizes A7, A6 or A5 (A4 needs at least 2 screws)	Laminator HR12 Leitz
Cut or print your photo to 2/3 the size of the laminating pouches, this will leave 1/3 of the pouch as transparent frame. Place your photo right in the middle of the pouch. Laminate. Perforate a hole near one of the lower corners (distance from border depends from screw shape), you can use a paper perforator. Stick the screw from behind through the hole, screw the rounded screw cap, tighten from back. That's all.
Screw Model		Brick Model (3 Lego bricks)
(C)opyright 2000-2006 Claude Rieth